Видео

Mogą spokojnie produkowac baterie, na której dron bedzie latał realne 50minut, ale widocznie wolą sprzedawac małe baterie za 300zł sztuka. To jest biznes, produkują za 50zł sprzedają po 300.

@@moskil2 mogą sprzedawać za 600 większe też będzie biznes ktoś zawsze kupi

Actually, my longest flight is 13.1 km in range, with a total flying distance of 27 km. It’s in another video.

@@moskil2m yopinion whatever one way flight distance reach more 12 KM .It proves that DJI not making a market gimmick. It is really true as their product page or website description.

Sadly, all new DJI Mini Pro 4 batteries are locked by DJI with a new access key. This means a new hex key is necessary for unseal, and it’s not available yet. :(

Please keep us in mind if you find out that a new key for the mini 4 pro becomes available. Thank you.

That’s exactly the same type of battery (LiPo), so a battery with a bigger capacity is also heavier. This is the actual limit related to the current state of knowledge.

@@moskil2 owesom

The serial number is also on the battery case. You need to connect DJi_Batt_killer, then use it. In the first tab, ‘Commands,’ write 00 in the first place and D8 below. Then, ‘Read Word,’ put the new value from the case, and ‘Write Word'.

Cuma tidak bisa dicharger karena aku pakai baterai DJi spark😢

I never saw your video probably because you use a non-English title and description, so I couldn’t find it through RUclips search.

@@moskil2 Could be. I try out a lot of things to see if what I'm doing could work. And as a little tip for people who don't know yet.

It’s possible to use spot welding. There are metal shims, 0.5mm thick, soldered to the PCB. Anyway, if you want to weld it, then I think it will be easier to leave about 1cm of the nickel strip from the old cell and weld the new metal strip directly to the old metal strip. Otherwise, you will have to grind down the place of the old spot welding.

After watching many times this tutorial video...now i understand...cant wait for your next diy videos...gracias

Yes you can

​@@moskil2how reset cycle count

You're welcome

Up to 50 minutes

Probably yes, it works on most cars that support Android Auto

Battery from DJI or non-original replacement?

Kupilem mod FCC dla pilota RC

Aktualnie budowa takiego aku sprawia zbyt wiele problemów zebym sie tym zajmował :P. Głowny problem to fakt ze trzeba miec oryginalną baterie, ktora nie ma update, czyli mowiac wprost trzeba miec starą baterie, bo te ktore teraz sa do kupienia w sklepie są zablokowane

@@moskil2No dobra a nie można dać nowych ogniw polutować i żeby to działało? 😎🥳 pewnie nie można bo było by to za proste. Jak to działa na jakiej zasadzie?

@@abstrahujacod5130 Nie mozna, po pierwsze jak nawet na 1sekunde odepniesz ogniwa od BMS i napiecie spadnie do zera to firmware zablokuje baterie. Zeby ją odblokowac trzeba odpalic apke (Battery killer) i kliknąc CLEAR PF, ale da sie to zrobic tylko wtedy gdy mozna otworzyc firmware, czyli działa UNSEAL. Nawet jak uda ci sie wymienic ogniwa bez odpinania zasilania z BMS to firmware bedzie miał zapisaną starą wartosc pojemnosci np 2450mah, wiec nawet jak podepniesz tam ogniwa 10000mah to kiedy dron zużyje 2450m to uzna ze bateria jest wyczerpana i bedzie forsował lądowanie. Czyli generalnie opcja "UNSEAL" musi działac, w nowych aku (sprzedawanaych po tym jak wyszedł mini 4) nie działa unseal, wiec lipa. Dlatego trzeba miec jakis stary aku bez nowych updatów. Poprawne wykonanie moda to wymiana ogniw, podpiecie softu Battery Killer - UNSEAL- CLEAR PF - wpisanie nowej wartosci pojemnosci np 6200mAh - SEAL. Bez UNSEAL nie da rady.

ruclips.net/video/DY0_m6MwxVw/видео.html

I always use auto Wi-Fi. Both brackets were printed and mounted on my RC. The small bracket should be used with 1mm thick double-sided tape for shimming because it’s really close to the RC case. Anyway, I recommend using double-sided tape with both brackets for better holding. ‘Blokada’ is a kind of lock; you put it in place when the bracket is already mounted. The ‘Blokada’ also has two holes where you can insert screws to secure it to the RC case. Unfortunately, you can’t use the original screws because they are too short, so you should find similar screws that are about 2-3mm longer.

@@moskil2 Perfect, thank you. I have the small part printed and I'll be installing soon. Interesting that you always use Auto mode - have you noticed if it switches between 2.4 and 5.8 during your long flights?

First, you should connect and check if you can unseal the battery. If you can’t, then the battery can’t be modified. If you can unseal it, then change the cell and then connect to the battery to clear the memory and change the capacity.

@@moskil2 Thank you for your advice 😍

I dont know but discharge current is enough cause cell dont get hot during fly

Hehe, I know, but I’m not a content creator. I don’t have free hours for video editing, so there were two choices: first, to upload the video after some quick editing, and second, to delete the recording and forget it :P

Ducati I came to see your videos and they're just not there 😎

Jaki wyjdzie koszt takiego akumulatora?

@@abstrahujacod5130 Celki 6200mah to 2x40zł, programator CP2112 16zł, plus trzeba miec stary akumulator

I dont sell, sry

www.amazon.com/NovelLife-Mini-TS100-Soldering-Digital/dp/B0BLNHB11B?ref_=ast_sto_dp&th=1